How to make Circuit amplifier Simple, Use TDA2030
TDA2030 is a common ic in electronic. Nowadays every small sound system used TDA2030.
TDA2030 Amplifier circuit
Bass Sound on your subwoofer then try this simple circuit to improve your woofer speaker performance good. This circuit is constructed by using TDA2030, and this is intended for use as a Low-frequency class-AB amplifier circuit. this circuit provides 30 watts output.
This amplifier circuit constructed by using TDA2030 amplifiers, upper side amplifier output is connected to the speaker +ve terminal and lower side amplifier O/P is connected to the -ve terminal of the speaker. The audio input applied to the noninverting input of IC.
The TDA2030 is a monolithic integrated circuit, intended for use as a
low-frequency it’s class-AB amplifier. normally it
provides 14 W output power at
14 V/4 Ω. At ±14 V the guaranteed output
power is 12 W on a 4 Ω load and 8 W on an 8 Ω
The TDA2030 provides high output current and
has very low harmonic and crossover distortion.
the device incorporates an original
(and patented) short-circuit protection system
comprising an arrangement for automatically
limiting the dissipated power so as to keep them
operating point of the output transistors within
their safe operating range.
Let’s go to Watch the Video.How to make Circuit amplifier
Nowadays TDA2030 is a common ic. 80% computer subwoofer used this ic. this is a low noise and low frequency
IC. low price and very easy to make the diagram to make it. it’s a mono based ic. it can run 9 volts to 28 volts. but normally we use 12 volts for good performance. we also can use this circuit with the 12-volt battery. I make a simple circuit diagram for you. it’s so easy to make no need many components to make this circuit. Just watch this video which video I make for you. you also can make this circuit diagram.
Please subscribe, Like and Join our Group