600 watts power amplifier:
Today we are going to make 600 Watts amplifier. It is a transistor amplifier. we used 2sa1943 and 2sc5200 transistors. we have to know that transistor can’t give us the Watts. the transformer is the main and important subject for making a good quality amplifier. Here in this article, we can Watch a video for making an amplifier. we can see where we used a 45-0-45 voltage and 15-ampere transformer. we know that Voltage X ampere = Watts. According to the rules 45X15=675Watts. So this transformer can give us 675 Watts. So we can understand that we use the transformer according to our needs. if we need 1000Watts? we have to use 50X20=1000Watts. amplifier using transistor.
600 watts power amplifier
How many transistors we have to use this amplifier?
We know that one transistor can take maximum 1.2 amperes. here we use 15 amperes. So 15/1.2= 12.5. here in this amplifier, we need minimum 12 transistors. We use this amplifier 12 transistor board. but if you can please use some extra transistor for better performance. using some extra transistor will help to protect the load. and also will be a little hot. So we can understand that always we have to use the transistor according to our transformer. for an example, we are going to make 500 Watts amplifier. We have to use 50 voltage and 10 amperes. 50X10=500Watts. We also have to know that we can use 30 voltage to 70 voltage.
Please use the good quality of the diode:
Please use diode according to your transformer ampere. If you use the 5-ampere transformer, you need the 10-ampere diode for the good performance.
Let’s Watch the video how to make an amplifier?
Thanks for watching the video.if you like please like our Facebook Page
Thanks a lot to be with us. If you want another post then please visit our website.
We have another post for you. like as repairing amplifier,
If you like electronics please visit our another post. electronicshelpcare.com
our Facebook page is Electronicshelpcare
Please like comment and share our post.